SLS vs SLES: Irritation, 1,4-Dioxane & Sulfate-Free
SLS (sodium lauryl sulfate) is the harsher of the two sulfates. SLES (sodium laureth sulfate) is milder on skin but can carry trace 1,4-dioxane from how it is made.
Last reviewed
The Glow angle
Glow reads the full ingredient list when you scan a cleanser, shampoo, or body wash, and it names the surfactants it finds. You can see at a glance whether a product relies on SLS, SLES, or a milder sulfate-free blend, and where that cleanser sits on the list. The 0-100 safety score reflects the whole formula, so one sulfate does not decide it alone.
SLS vs SLES: the short answer
In the SLS vs SLES question, the main difference is irritation. Sodium lauryl sulfate (SLS) is a strong cleanser that dermatologists and researchers use on purpose to irritate skin in lab tests. Sodium laureth sulfate (SLES) is a modified version of the same molecule, and in patch tests it causes far less redness and barrier damage. The trade-off is that SLES goes through a process called ethoxylation, which can leave trace amounts of a contaminant called 1,4-dioxane.
Both are legal, both are common, and both make the rich foam people expect from shampoo, body wash, and face cleanser. Which one suits you depends on your skin, how long the product stays on, and how often you use it.
How the two molecules differ
SLS and SLES start from the same fatty alcohol, usually from coconut or palm oil. To make SLS, that alcohol is sulfated directly. To make SLES, manufacturers first react it with ethylene oxide, which adds a short chain of "ethoxy" units. That step is where the "eth" in laureth comes from.
The added chain makes the SLES molecule bigger and more water-friendly. In practice, it binds less tightly to skin proteins and strips fewer of the lipids that hold the skin barrier together. That is why SLES feels gentler even at similar concentrations.
The names are easy to confuse, and they are often used as if they mean the same thing. The Cosmetic Ingredient Review (CIR), the US industry-funded panel that assesses cosmetic ingredient safety, has pointed out that SLS stands only for sodium lauryl sulfate. Sodium laureth sulfate is a different chemical.
Irritation: what the research shows
SLS irritation depends on concentration and contact time. CIR found that SLS is an irritant in patch testing at 2 percent and above, and that irritation rises the longer it stays on skin. Its conclusion was that SLS appears safe in products designed for brief use followed by thorough rinsing.
For SLES, CIR noted that it can irritate eyes and skin like other detergents, with severity tied to concentration. It concluded that SLES is safe as used in cosmetics.
A direct comparison published in Contact Dermatitis tested SLS, SLES, and a plant-derived surfactant on volunteers at several strengths. SLS produced a pronounced reaction, and its effect on skin water loss was still measurable after ten days. SLES caused a much milder reaction that faded sooner. Other research shows facial skin, and especially the skin of younger people, reacts more strongly to SLS than other areas.
What this means for you:
- A shampoo or body wash with SLS that you rinse off quickly is unlikely to bother most people.
- A face cleanser with SLS used twice a day can be too much for dry, sensitive, or eczema-prone skin.
- If you have rosacea, eczema, or a damaged barrier, SLES or a sulfate-free formula is usually the easier choice.
Formulation matters as much as the sulfate itself. Many brands pair SLS or SLES with milder co-surfactants like cocamidopropyl betaine, which can soften the overall effect.
The 1,4-dioxane question with SLES
1,4-dioxane is not an ingredient anyone adds on purpose. It forms as a byproduct during ethoxylation, so it can appear in SLES and in other ingredients made the same way. According to the FDA, you can spot those ingredients by name: look for "PEG," "polyethylene glycol," "polyoxyethylene," "-eth-," or "-oxynol-."
The US National Toxicology Program lists 1,4-dioxane as reasonably anticipated to be a human carcinogen, based on animal studies. That sounds alarming, but dose is the key point. The FDA has recommended since the 1980s that manufacturers remove it through a step called vacuum stripping. Its surveys show levels in cosmetics falling over time, and in a 2008 survey most products had none detectable. The EU's scientific safety committee considers trace levels of 10 ppm or less safe for consumers.
SLS is not ethoxylated, so it does not carry this concern. That is the main reason some people pick SLS over SLES, even though SLS is the harsher cleanser.
If 1,4-dioxane worries you, the practical options are:
- Choose brands that state they test for or limit 1,4-dioxane.
- Prefer rinse-off products, where contact time is short.
- Choose a sulfate-free cleanser that also avoids ethoxylated ingredients.
What "sulfate-free" really means
A sulfate-free label usually means the product has no SLS, SLES, or ammonium versions of them (ammonium lauryl sulfate and ammonium laureth sulfate). It does not always mean the formula is mild, and the term has no formal legal definition in the US.
Common sulfate-free cleansers include:
- Sodium cocoyl isethionate
- Sodium lauroyl sarcosinate
- Decyl glucoside and coco-glucoside
- Cocamidopropyl betaine
- Disodium laureth sulfosuccinate
Two details catch people out. First, sodium coco-sulfate is still a sulfate, made from the mixed fatty acids in coconut oil, and it behaves a lot like SLS. Second, some sulfate-free cleansers still contain "-eth-" ingredients, so they can share the 1,4-dioxane question with SLES.
Sulfate-free formulas tend to foam less. That is normal and does not mean they clean worse.
Who should care most
Sulfates are not a problem for everyone. You have more reason to look closely if:
- You have dry, sensitive, or eczema-prone skin.
- You have rosacea or perioral dermatitis and notice flares after cleansing.
- You color-treat or chemically straighten your hair and want a gentler wash.
- You use the same cleanser on your face twice a day, every day.
- Your skin feels tight, itchy, or squeaky right after washing.
If a cleanser leaves your skin red, flaky, or stinging, stop using it for a week and see whether things settle. Persistent rashes, cracking, or burning need a dermatologist, since sulfate irritation can look like other conditions.
How to read the label
Ingredients on US and EU labels are listed in descending order of concentration, at least for anything above 1 percent. A sulfate in the first three ingredients after water is the main cleanser. One near the end plays a minor role.
When you compare SLS vs SLES on a real label, check three things: which sulfate is listed, how high it sits, and whether the product rinses off or stays on. A rinse-off shampoo with SLES high on the list is a very different exposure from a leave-on product, which rarely contains either.
Conclusion
SLS vs SLES comes down to a simple trade. SLS cleans hard and irritates more, but it has no 1,4-dioxane concern. SLES is gentler on skin but can carry trace 1,4-dioxane from ethoxylation, which careful manufacturers reduce. For sensitive skin, SLES or a well-made sulfate-free cleanser is the safer starting point, and short contact time always helps.
Ingredients to flag
Glow surfaces these on labels at the shelf.
Sodium lauryl sulfate (SLS)
A strong anionic cleanser and the standard lab irritant. Irritation rises with concentration and contact time, so it is a poor fit for daily face washing on sensitive skin.
Ammonium lauryl sulfate (ALS)
A close relative of SLS that CIR assessed alongside it. It behaves similarly on skin and is common in shampoos.
Sodium laureth sulfate (SLES)
Milder than SLS in patch tests, but it is ethoxylated, so trace 1,4-dioxane can remain if the maker does not purify it.
Ammonium laureth sulfate
The ammonium form of SLES, with the same milder profile and the same ethoxylation byproduct question.
Sodium coco-sulfate
Often marketed as a natural alternative, but it is still a sulfate made from coconut fatty acids and contains a large lauryl sulfate fraction.
PEG and polyethylene glycol ingredients
FDA names PEG, polyethylene glycol, and polyoxyethylene as markers of ingredients that can carry trace 1,4-dioxane.
Ingredients with -eth- or -oxynol- in the name
Laureth, ceteareth, and similar names signal ethoxylation, the step that forms 1,4-dioxane as a byproduct.
Fragrance in a sulfate cleanser
Sulfates loosen the skin barrier, which can make fragrance allergens more likely to irritate. The pairing is worth a second look for sensitive skin.
Frequently asked questions
No. SLS is sodium lauryl sulfate and SLES is sodium laureth sulfate, a different chemical made by adding ethoxy units before sulfation. SLES is larger and milder on skin. The Cosmetic Ingredient Review has noted that the two are often confused online.
SLS is the more irritating of the two in patch tests, and its effect on skin water loss lasts longer. SLES causes a milder reaction that fades sooner. Both irritate more at higher concentrations and with longer contact.
It can contain trace amounts, because 1,4-dioxane forms during ethoxylation. FDA recommends that makers remove it with vacuum stripping, and its surveys show levels falling over time. Brands that test for it often say so on their site.
Many stylists recommend it, because sulfate-free cleansers are gentler and strip less oil. Sulfate-free formulas foam less, which is normal. If your hair builds up product, an occasional sulfate wash can still help.
No. Sodium coco-sulfate is a sulfate made from the mixed fatty acids in coconut oil, and much of it is lauryl sulfate. It behaves a lot like SLS on skin, even though it is sometimes marketed as a gentler, natural option.
SLS can cause irritant dermatitis, with redness, dryness, and stinging, especially on the face or with frequent use. If a cleanser makes your skin react, stop it and see if things calm down. See a dermatologist if a rash persists or spreads.
Sources
- SLS (Sodium Lauryl Sulfate) and Sodium Laureth Sulfate safety assessment summary · Cosmetic Ingredient Review (CIR)
- Profile of irritant patch testing with detergents: sodium lauryl sulfate, sodium laureth sulfate and alkyl polyglucoside · Contact Dermatitis (peer-reviewed), via PubMed
- 1,4-Dioxane in Cosmetics: A Manufacturing Byproduct · U.S. Food and Drug Administration (FDA)
- Sodium lauryl sulfate-induced irritation in the human face: regional and age-related differences · Skin Pharmacology and Physiology (peer-reviewed), via PubMed
This page summarizes publicly available information from the sources listed above and is for educational use only. It is not medical advice. App names are trademarks of their owners, and Glow is not affiliated with them.
One selfie. A plan for your skin and colors.
Skinn (formerly Glow) turns one face scan into a skin score, notes for each area, a morning and evening routine, and a 12-season color analysis. Scan a product barcode for a 0-100 ingredient score. Free to download on iOS.
Download on the App StoreMore from the Library
Are parabens bad?
For most people, parabens in cosmetics are not bad. The FDA and EU allow the common ones within limits, five rarer parabens are banned in the EU, and allergy is uncommon.
Deodorant ingredients to avoid
Fragrance, baking soda, and propylene glycol cause most underarm rashes from deodorant. Research has not shown that aluminum in antiperspirant causes breast cancer.
Lip balm ingredients to avoid
Lip balm ingredients to avoid include menthol, camphor, phenol, fragrance, and flavors like cinnamon or mint. Petrolatum, ceramides, and shea butter help dry lips heal.
Best ingredients for dark circles
The best ingredients for dark circles depend on the type: vitamin C, niacinamide, and retinoids for brown pigment, caffeine for blue or purple tones, and daily sunscreen for all of them.