What Does Hyaluronic Acid Do? Science, Sizes & How to Apply
Hyaluronic acid is a humectant that pulls water into the top layer of skin, so skin looks plumper and smoother. Apply it to damp skin and seal it with moisturizer.
Last reviewed
The Glow angle
Hyaluronic acid itself is gentle, so reactions to a hydrating serum usually come from the rest of the formula. Glow scans a product barcode, gives a 0-100 safety score, and flags fragrance, preservatives, allergens, and pore-clogging ingredients, so you can find sodium hyaluronate on the label and check the moisturizer you seal it with. Glow does not give medical advice about fillers or skin conditions.
What does hyaluronic acid do? It is a humectant, which means it attracts and holds water. On your skin, it pulls moisture into the top layer, so skin looks plumper, smoother, and less tight within minutes. With regular use, studies show better hydration and elasticity, and smaller hyaluronic acid can soften the look of fine lines. It does not exfoliate, and it is gentle enough for almost every skin type.
Hyaluronic acid is in serums, moisturizers, sheet masks, eye creams, and even sunscreens, often under the name sodium hyaluronate. An app like Glow can show you where it sits on the ingredient list and what else comes with it, such as fragrance.
What hyaluronic acid is
Hyaluronic acid is a sugar molecule that your body makes on its own. It sits between cells in the skin, joints, and eyes, where it holds water and keeps tissue flexible. A large share of the body's hyaluronic acid is in the skin.
The Cleveland Clinic describes it as very good at retaining water, because its long, chain-like structure gives water many places to attach. Your skin makes less of it as you age, which is one reason mature skin feels drier.
The hyaluronic acid in skincare is usually made by fermentation. It does not come from animals in most modern products.
How hyaluronic acid works on skin
Skincare moisturizers work in three ways:
- Humectants, such as hyaluronic acid and glycerin, pull water into the skin.
- Emollients, such as squalane and plant oils, smooth the surface.
- Occlusives, such as petrolatum and dimethicone, form a film that slows water loss.
Hyaluronic acid is a humectant. It draws water from the deeper layers of skin and from the air into the outer layer. This makes the surface look plumper and more even, and fine dry lines look softer.
A humectant needs a partner. Without a moisturizer on top, some of the water it holds can evaporate again, especially in dry air or in heated and air-conditioned rooms. This is why some people say a hyaluronic acid serum makes their skin feel tight. The fix is simple: seal it in.
Molecular weight and why it matters
Hyaluronic acid comes in different sizes, measured in kilodaltons (kDa). Size changes where it goes and what it does.
High molecular weight
Large hyaluronic acid, around 1,000 kDa and above, stays on the surface. In a 2016 Raman spectroscopy study on human skin, hyaluronic acid of 1,000 to 1,400 kDa did not pass through the stratum corneum, the outer layer. It forms a light film that holds moisture and makes skin feel smooth right away.
Low and medium molecular weight
Smaller hyaluronic acid, roughly 20 to 300 kDa in that same study, passed through the outer layer. A 2011 clinical trial tested 0.1% creams of five sizes around the eyes for 60 days. All sizes improved hydration and elasticity compared with a plain cream, but only the 50 kDa and 130 kDa versions significantly reduced wrinkle depth.
Multi-weight formulas
Many serums now combine several sizes, so they can hydrate the surface and the layer below it. This is a reasonable design, but there is less research on the blends than on single sizes. Very small fragments are the least studied, so more is not always better.
Most brands do not print the molecular weight. Words such as "multi-weight," "low molecular weight," or "hydrolyzed" give you a clue.
Hyaluronic acid names on a label
Hyaluronic acid can appear under several INCI names:
- Hyaluronic acid
- Sodium hyaluronate, the salt form and the most common one
- Hydrolyzed hyaluronic acid or hydrolyzed sodium hyaluronate, broken into smaller pieces
- Sodium acetylated hyaluronate, a modified form
- Sodium hyaluronate crosspolymer, a crosslinked form that holds water and stays on the surface
Ingredient lists go from the highest amount to the lowest, down to 1%. Hyaluronic acid is effective at low levels. The 2011 trial used only 0.1%, so it often appears halfway down a label and still does its job.
How to apply hyaluronic acid
The way you apply it matters as much as the product.
- Wash your face with a gentle cleanser.
- Leave your skin slightly damp, or mist it with water.
- Apply a few drops of hyaluronic acid serum and press it in with your fingertips.
- Apply a moisturizer within a minute or two to seal in the water.
- In the morning, finish with a broad-spectrum sunscreen.
Hyaluronic acid goes after water-thin products such as toners and before creams. Our skincare routine order guide shows where each step fits. You can use it once or twice a day.
Who benefits, pairings, and safety
Hyaluronic acid suits almost everyone, including people with oily, acne-prone, sensitive, and mature skin. It is light, it is not an oil, and it does not exfoliate.
It pairs well with:
- Retinoids, to offset dryness. Read retinol for beginners for a gentle start.
- Exfoliating acids, as a hydrating step after them.
- Niacinamide, for barrier support. See what niacinamide does.
- Vitamin C and sunscreen in the morning.
Despite the word "acid" in its name, it is safe to use with active ingredients. Our guide to skincare ingredients that should not be mixed explains which pairs do need care.
Is hyaluronic acid safe?
The Cleveland Clinic says research shows hyaluronic acid is safe, reactions are rare, and it is considered safe during pregnancy and breastfeeding. Topical hyaluronic acid is a different thing from hyaluronic acid fillers, which a licensed professional must inject.
If a serum stings or causes redness, the cause is often another ingredient in the formula, such as fragrance, essential oils, or a high level of alcohol. Patch test new products first. If you get a rash or swelling, stop the product and see a dermatologist.
How to do this with Glow
Glow helps you check a hyaluronic acid product before you buy it.
- Open Glow and scan the barcode of the serum or moisturizer.
- If the barcode is not found, search for the product by name in the Search tab.
- Read the 0-100 safety score and the flagged ingredients. Glow flags fragrance, preservatives, allergens, and comedogenic and pore-clogging ingredients.
- Find sodium hyaluronate or another hyaluronic acid name in the list.
- If you have acne-prone skin, check the moisturizer you plan to seal it with for pore-clogging flags too.
- Add both products to your routine with Glow's skincare routine builder.
A good hyaluronic acid serum is often a short, simple formula. If the label shows fragrance or a long list of essential oils, Glow flags them so you can compare other options.
The bottom line
What does hyaluronic acid do? It pulls water into the outer layer of your skin, so skin looks plumper and smoother, and smaller sizes can soften fine lines over weeks. Look for sodium hyaluronate on the label, apply it to damp skin, and seal it with moisturizer. It is gentle, it suits almost every skin type, and it pairs with nearly every other ingredient in your routine.
Ingredients to flag
Glow surfaces these on labels at the shelf.
Sodium hyaluronate
The salt form of hyaluronic acid and the most common name on labels. It works at low levels, so a mid-list position is normal.
Hydrolyzed hyaluronic acid
Smaller pieces that can pass the outer skin layer. Research supports low and medium sizes for fine lines.
Sodium hyaluronate crosspolymer
A crosslinked form that holds water on the surface and gives a smooth film.
High molecular weight hyaluronic acid
Stays on the surface and hydrates right away, but does not pass into deeper layers.
Apply to damp skin, then seal
A humectant needs water and an occlusive partner. Without moisturizer on top, it can leave skin feeling tight in dry air.
Fragrance / parfum and essential oils
Common in hydrating serums and the more likely cause of stinging or redness than the hyaluronic acid.
Denatured alcohol high on the list
It can dry the skin and work against the goal of a hydrating product.
Pore-clogging ingredients in the sealing moisturizer
If you have acne-prone skin, check the cream you put on top for comedogenic oils and esters.
Frequently asked questions
It pulls water into the top layer of skin, so your face looks plumper and smoother and feels less tight. With regular use, studies show better hydration and elasticity, and low molecular weight forms can reduce the look of fine lines.
Apply it to slightly damp skin, then seal it with a moisturizer within a minute or two. Damp skin gives the humectant water to hold, and the moisturizer slows evaporation.
Sodium hyaluronate is the salt form of hyaluronic acid. It is more stable in formulas and is the most common form on skincare labels. Both hydrate skin the same way.
Yes. It is gentle enough to use once or twice a day, morning and night. It pairs with retinol, vitamin C, niacinamide, and acids.
In dry air, a humectant without a moisturizer on top can lose the water it pulled in. Apply it to damp skin and seal it with a cream. If you also get stinging, check the formula for fragrance or alcohol.
The Cleveland Clinic says topical hyaluronic acid is considered safe during pregnancy and breastfeeding. Ask your doctor about any product that combines it with other actives, such as retinoids.
Sources
- Hyaluronic Acid: What It Is, Benefits, How To Use & Side Effects · Cleveland Clinic
- Human skin penetration of hyaluronic acid of different molecular weights as probed by Raman spectroscopy · Skin Research and Technology (peer-reviewed, 2016)
- Efficacy of cream-based novel formulations of hyaluronic acid of different molecular weights in anti-wrinkle treatment · Journal of Drugs in Dermatology (peer-reviewed, 2011)
- Penetration enhancement effects of topically applied crosslinked hyaluronic acid · International Journal of Cosmetic Science (peer-reviewed, 2026)
This page summarizes publicly available information from the sources listed above and is for educational use only. It is not medical advice. App names are trademarks of their owners, and Glow is not affiliated with them.
One selfie. A plan for your skin and colors.
Skinn (formerly Glow) turns one face scan into a skin score, notes for each area, a morning and evening routine, and a 12-season color analysis. Scan a product barcode for a 0-100 ingredient score. Free to download on iOS.
Download on the App StoreMore from the Library
Are parabens bad?
For most people, parabens in cosmetics are not bad. The FDA and EU allow the common ones within limits, five rarer parabens are banned in the EU, and allergy is uncommon.
Deodorant ingredients to avoid
Fragrance, baking soda, and propylene glycol cause most underarm rashes from deodorant. Research has not shown that aluminum in antiperspirant causes breast cancer.
Lip balm ingredients to avoid
Lip balm ingredients to avoid include menthol, camphor, phenol, fragrance, and flavors like cinnamon or mint. Petrolatum, ceramides, and shea butter help dry lips heal.
Best ingredients for dark circles
The best ingredients for dark circles depend on the type: vitamin C, niacinamide, and retinoids for brown pigment, caffeine for blue or purple tones, and daily sunscreen for all of them.