Skinn

Ingredients

Harmful Ingredients in Shampoo: What the Evidence Says

The shampoo ingredients with the best evidence for problems are MI/MCI, formaldehyde releasers, and fragrance, which can cause allergy. Sulfates can irritate a sensitive scalp.

Last reviewed

The Glow angle

Glow scans a shampoo barcode and flags fragrance, preservatives such as MI, MCI, and formaldehyde releasers, sulfates, and other common allergens. The 0-100 safety score reflects the whole formula, so one sulfate does not decide it alone. Glow checks ingredient lists and does not diagnose scalp conditions, so a lasting rash or hair loss needs a dermatologist.

Harmful ingredients in shampoo: the short answer

The harmful ingredients in shampoo that have the strongest evidence behind them are allergens. The main ones are the preservatives methylisothiazolinone (MI) and methylchloroisothiazolinone (MCI), formaldehyde-releasing preservatives such as DMDM hydantoin, and fragrance. Sulfates and cocamide DEA come up often too, and the evidence for them is more mixed.

"Harmful" here mostly means a risk of an itchy, red, or flaky scalp, or a rash on the face, neck, and hands where shampoo runs. For most people, a shampoo that rinses off in a minute is a low exposure. For people with a sensitive scalp, eczema, or a known allergy, the label matters a lot. A scanner such as Glow can scan a shampoo barcode and flag these ingredients for you, and this guide explains what each one is and what the evidence says.

Sulfates: SLS and SLES

Sodium lauryl sulfate (SLS) and sodium laureth sulfate (SLES) are the cleansers that make shampoo foam. They remove oil well, and SLS in particular is a known skin irritant. Neither is considered toxic at the levels used in shampoo. Researchers use SLS on purpose to irritate skin in lab tests.

A study in Contact Dermatitis compared SLS and SLES on volunteers. SLS caused a strong reaction that lasted, and SLES caused a much milder one. Because shampoo rinses off quickly, most people tolerate both. Sulfates matter more if you have a dry or sensitive scalp, eczema, or color-treated or curly hair that dries out easily.

SLES and other "-eth-" ingredients can carry trace 1,4-dioxane from manufacturing. The FDA explains that this is a byproduct, and that careful manufacturers reduce it with an extra processing step.

Preservatives: MI, MCI, and formaldehyde releasers

MI and MCI

Methylisothiazolinone and methylchloroisothiazolinone are strong preservatives. They became a frequent cause of allergic contact dermatitis in the 2010s, which led the European Union to act.

  1. The EU banned MI in leave-on cosmetics from 2017.
  2. EU Regulation 2017/1224 then cut the limit for MI in rinse-off products, such as shampoo, to 0.0015 percent (15 ppm) from 2018. The regulation cites the increase in allergies to MI.
  3. The MCI/MI mixture is allowed in the EU only in rinse-off products.

In the US, these preservatives remain legal, and some shampoos sold there still use them. Once a person is allergic to MI, even small amounts in a rinse-off product can cause a reaction. If you have a known MI allergy, check every shampoo, conditioner, and body wash.

Formaldehyde releasers

Some preservatives release small amounts of formaldehyde over time to keep the product free of microbes. On a shampoo label, look for:

  • DMDM hydantoin
  • Quaternium-15
  • Imidazolidinyl urea
  • Diazolidinyl urea
  • Sodium hydroxymethylglycinate
  • 2-Bromo-2-nitropropane-1,3-diol (bronopol)

A clinical review in Contact Dermatitis describes formaldehyde and formaldehyde releasers as a well-known cause of contact allergy. People allergic to formaldehyde can react to these preservatives too. For people without that allergy, the amounts in a rinse-off shampoo are small.

Keep this separate from hair smoothing treatments. The FDA warns that some smoothing products contain formaldehyde, also listed as formalin or methylene glycol, and release it as a gas when heated with a flat iron. That is a much bigger exposure than a shampoo preservative.

Fragrance

Fragrance is one of the most common causes of cosmetic allergy. The FDA notes that companies can list a fragrance blend simply as "fragrance" on a US label, so you cannot see which of the many possible components it contains. Some components, such as linalool and limonene, are named on EU labels when they pass set levels.

Fragrance in a shampoo touches the scalp, face, ears, and neck. If you get a rash along the hairline or behind the ears, fragrance is one of the first things to check. Choose fragrance-free products, and remember that "unscented" can still mean a masking fragrance is present.

DEA and cocamide DEA

Cocamide DEA is a foam booster made from coconut oil. In 2012, California added it to its Proposition 65 list of chemicals known to cause cancer, based on animal studies reviewed by the International Agency for Research on Cancer. That listing is why some shampoos sold in California carry a Prop 65 warning.

The cancer evidence comes from animal studies, and the agency found no adequate data in people. As an allergen, cocamide DEA is uncommon. A Belgian study found an allergy in about 1 percent of 1,767 patients who had patch testing, and all of them had an already damaged skin barrier. Many brands have moved to other foam boosters.

Gentler shampoo alternatives

If your scalp reacts to standard shampoos, look for these features:

  1. A fragrance-free formula.
  2. No MI, MCI, or formaldehyde releasers on the label.
  3. Milder cleansers, such as sodium cocoyl isethionate, decyl glucoside, coco-glucoside, or sodium lauroyl sarcosinate.
  4. A short ingredient list, which makes it easier to find a trigger.
  5. A separate gentle conditioner, so you can wash less often if your scalp is dry.

Note that "sulfate-free" does not mean allergen-free. A sulfate-free shampoo can still contain fragrance and MI.

How to check a shampoo with Glow

  1. Open Glow and scan the shampoo barcode. Glow checks it against its catalog of more than 35,000 products and Open Beauty Facts.
  2. If the barcode is not found, search for the product by name in the Search tab.
  3. Look at the flags for fragrance, preservatives such as MI and formaldehyde releasers, sulfates, and other common allergens.
  4. Check the 0-100 safety score for the whole formula.
  5. Scan your conditioner and body wash too, since they touch the same skin.

When to see a dermatologist, and the bottom line

Ingredients are only one cause of scalp trouble. Dandruff, seborrheic dermatitis, psoriasis, and fungal infections can look like a product reaction. See a dermatologist if itching or flaking lasts more than a few weeks after you change products, if you see hair loss, sores, or thick scale, or if a rash spreads. A dermatologist can do patch testing to find a specific allergen.

The harmful ingredients in shampoo with the clearest evidence are allergens: MI and MCI, formaldehyde releasers, and fragrance. Sulfates can dry and irritate sensitive scalps, and cocamide DEA carries a California warning based on animal data. Read the label, choose a fragrance-free shampoo with a gentle cleanser if your scalp is sensitive, and get a dermatologist's opinion if the problem continues.

Ingredients to flag

Glow surfaces these on labels at the shelf.

  • Methylisothiazolinone (MI)

    A strong preservative and a frequent cause of allergic contact dermatitis. The EU cut its limit in rinse-off products to 0.0015 percent in 2018 because of rising allergy rates.

  • Methylchloroisothiazolinone (MCI) / MI mixture

    Often listed as methylchloroisothiazolinone and methylisothiazolinone together. The EU allows the mixture only in rinse-off products, and people with an MI allergy often react to it.

  • DMDM hydantoin

    A formaldehyde-releasing preservative common in shampoos and conditioners. It can trigger reactions in people allergic to formaldehyde.

  • Quaternium-15, imidazolidinyl urea, diazolidinyl urea

    Other formaldehyde releasers. They are well-known contact allergens in patch testing clinics.

  • Sodium hydroxymethylglycinate and bronopol (2-bromo-2-nitropropane-1,3-diol)

    Less obvious formaldehyde-releasing preservatives. Check for them if you have a formaldehyde allergy.

  • Fragrance / parfum

    One of the most common causes of cosmetic allergy. US labels can list the whole blend as fragrance, so the individual components stay hidden.

  • Sodium lauryl sulfate (SLS)

    A strong cleanser and a known skin irritant. It is usually tolerated in a quick rinse, but it can dry and irritate a sensitive or eczema-prone scalp.

  • Sodium laureth sulfate (SLES) and other -eth- ingredients

    Milder than SLS on skin, but ethoxylated ingredients can carry trace 1,4-dioxane from manufacturing. Careful manufacturers remove most of it.

  • Cocamide DEA

    A foam booster listed under California Proposition 65 since 2012 based on animal data. Contact allergy to it is uncommon and appears mostly in people with a damaged skin barrier.

Frequently asked questions

  • If you have a sensitive scalp, the most useful ones to avoid are fragrance, the preservatives MI and MCI, and formaldehyde releasers such as DMDM hydantoin. These are the shampoo ingredients most often linked to allergic reactions. Sulfates are worth avoiding if your scalp or hair feels dry and irritated after washing.

  • Sulfates are not considered toxic in shampoo. SLS is a known skin irritant, and SLES is milder. Because shampoo rinses off quickly, most people tolerate them, but people with eczema or a dry, sensitive scalp often do better with a sulfate-free formula.

  • DMDM hydantoin is a legal preservative that slowly releases small amounts of formaldehyde. For most people the exposure in a rinse-off shampoo is small. People with a formaldehyde allergy can react to it, so they should choose shampoos without formaldehyde releasers.

  • California requires a warning when a product contains a chemical on its Proposition 65 list above certain levels. In shampoo, cocamide DEA is a common reason, listed since 2012 based on animal studies. The warning is a California disclosure rule and does not by itself mean the product is unsafe.

  • Yes. Shampoo runs over the forehead, ears, neck, and shoulders, and allergens such as fragrance, MI, and formaldehyde releasers can cause a rash there. If the rash continues after you change products, a dermatologist can do patch testing to find the cause.

  • Look for a fragrance-free formula with no MI, MCI, or formaldehyde releasers, and a mild cleanser such as sodium cocoyl isethionate or decyl glucoside. A shorter list makes a trigger easier to find. A scanner such as Glow can check a product for these ingredients in a few seconds.

Sources

  1. Commission Regulation (EU) 2017/1224 amending Annex V to Regulation (EC) No 1223/2009 on cosmetic products · EUR-Lex, European Union
  2. Contact allergy to and allergic contact dermatitis from formaldehyde and formaldehyde releasers: A clinical review and update · Contact Dermatitis (peer-reviewed), via PubMed
  3. Profile of irritant patch testing with detergents: sodium lauryl sulfate, sodium laureth sulfate and alkyl polyglucoside · Contact Dermatitis (peer-reviewed), via PubMed
  4. Fragrances in Cosmetics · U.S. Food and Drug Administration (FDA)
  5. Coconut oil diethanolamine condensate (cocamide diethanolamine) · California Office of Environmental Health Hazard Assessment (OEHHA)
  6. Allergic contact dermatitis caused by cocamide diethanolamine · Contact Dermatitis (peer-reviewed), via PubMed

This page summarizes publicly available information from the sources listed above and is for educational use only. It is not medical advice. App names are trademarks of their owners, and Glow is not affiliated with them.

One selfie. A plan for your skin and colors.

Skinn (formerly Glow) turns one face scan into a skin score, notes for each area, a morning and evening routine, and a 12-season color analysis. Scan a product barcode for a 0-100 ingredient score. Free to download on iOS.

Download on the App Store